16 ElektroPhysik
-
an incorrect command is entered
-
the gauge is for any reason switched off
calibration cannot be continued. Restart the
procedure from the beginning.
3.1.3 Example of calibration
Calibration is the most important requirement for
accurate measurement. The more closely the
calibration sample matches the product sample, the
more accurate the calibration, and therefore the
reading, will be.
Example:
If a product is to be measured on a steel cylinder,
quality ST37 (mild steel) with a diameter of 6 mm
(0.24"), the calibration of an uncoated sample must
take place on a steel cylinder of similar quality with
the same diameter.
The calibration sample must correspond to the
product sample in the following ways:
Example of calibration
