Electrohome VistaGRAPHX 10K, User Manual

Page: 63 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#;3343 . HU * V # 0DQXDO
6068
and Other Controls" subsection if you need help. Changes made to the Preferences
menu will be saved when you exit the menu (press
([LW .)
)LJXUH #60481# 3UHIHUHQFHV # 0HQX
,PDJH # 2ULHQWDWLRQ
Choose from Front, Rear, Inverted Front, Inverted Rear
according to your installation. If the setting is incorrect,
the image will be reversed and/or upside down. See 2.6,
Operating Orientation for an illustrated explanation.
/DQJXDJH
Choose to display menu text in English, French, German, Italian or Spanish.
&KDQQHO # 6HOHFWLRQ
Choose how you want to select channels from the
&KDQ
key.
Choices are 1-digit entry, 2-digit entry, or a scrollable list
of channels (note that each channel to be included in the
list must also be tagged in the "In Menu" checkbox in the
Channel List menu).
/DPS # 3RZHU
Adjust the amount of power applied to the lamp to alter light output on screen.
The range of adjustment is 1000-1800 watts. A setting of 1800 (the default)
applies 1800 watts; anything less will increase lamp life while decreasing
brightness. The higher your lamp power settings, the shorter the life expectancy
of the lamp.
NOTES: 1) Unlike the other Preferences parameters, the Lamp Power setting
affects the current source/channel only and is recalled from source-to-source
(channel-to-channel) just as any Image Setting parameter. 2) Lamp power is
reduced to its 1000 watt minimum while in Standby.