Electrohome VistaGRAPHX 10K, User Manual

Page: 60 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
6065
6LJQDO # 7\SH
If "Auto" is checked, the projector will automatically detect
the type of signal present (unless it is RGB-Video or YUV)
and will display the signal type to the left in the adjacent
box. If "Auto" is unchecked, press
at the adjacent
pull-down list to view or select a different signal type from
a complete list available to the
projector. Re-check the "Auto"
checkbox whenever you want to return
to automatic detection of the signal
type.
NOTES: 1) RGB-Video (which requires a
third-party decoder) and YUV signals
cannot be automatically recognized — if
you use either of these sources, you must select the corresponding signal type from
the list. 2) It is recommended that this option remain set at auto for other signal
types. 3) If you are using the VDI optional interface, Signal Type will be “auto” and
the option list disabled.
<3U3E # +'79
Enter a checkmark only if your HDTV source is labeled “YPrPb”. This will
apply the correct colors needed for this standard. For all other sources —
including RGB HDTV — delete the checkmark. If you are not sure of the source,
judge by eye for the most accurate colors. By default, the checkmark is present
for any type of HDTV source and deleted for all other sources.
NOTE: This source requires an HDTV Input Module (available as an option) —
do not connect HDTV to Input 1. Contact your dealer or Electrohome.
9&5
+
6+257 # &87 # .(< =
)XQF
from presentation level.)
This option determines to what degree the projector tolerates signal disturbances.
Enter a checkmark only if the NTSC 3.58 image generated from your VCR
source appears noisy or unstable (such as after a fast-forward), or if the image
has a very high level of detail. For best results, leave blank.
6\QF # 7LS # &ODPSLQJ
This option can brighten the image produced from certain high resolution, high
frequency graphic sources. Enter a checkmark if the image appears unusually dim,
if there are horizontal streaks across the image, or if there is significant color drift.
Delete the checkmark if the image is either sufficiently bright or overly bright.
NOTE: Does not apply to video sources or any RGB source with sync
information on the video (e.g., sync-on-green).
2GG #2# (YHQ
Use this control to smooth out any circles and/or diagonals appearing jagged due
to missing or misaligned lines from some interlaced video signals. Choose the
option which produces the smoothest effect.