Electrohome VistaGRAPHX 10K, User Manual

Page: 119 / 127

Downloaded from Projector.com
237,21$/ # ,1387 # 02'8/(6
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO #
) 06
The Composite/S-Video Input Module may be installed in a Vista
GRAPHX
10K
projector, a Marquee signal switcher or a Marquee Case/Power Supply. The
module receives composite video or S-video input signals from tape or disk
players. Video inputs are 75
6
terminated. Video outputs are provided for
buffered loop-through to another display device.
)HDWXUHV
◊
BNC connectors for composite RGB signals
◊
4-pin mini-DIN connectors for S-Video signals
◊
RCA connectors for left and right channel audio inputs
◊
buffered loop-through video outputs
NOTE: This interface is not a decoder. Proper display of NTSC, PAL, OR
SECAM signals requires that the Vista
GRAPHX
10K includes a multi-standard
decoder.
The HDTV Input Module may be installed in a Vista
GRAPHX
10K projector,
Marquee signal switcher, or Marquee Case/Power Supply. The module receives
HDTV analog RGB input signals with tri-level sync, or YPrPb signals.
)HDWXUHV
◊
accepts RGB video with tri-level composite sync, or YPrPb signals
◊
BNC connectors for RGB signal inputs
◊
RCA connectors for left and right channel audio inputs
&RPSRVLWH #2# 6 0 9LGHR
ö
,QSXW # 0RGXOH
6;0;343370 [[
+'79 # ,QSXW # 0RGXOH
ö
6;0;343380 [[