Electrohome VistaGRAPHX 10K, User Manual, Page: 36 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
60;
,QSXW #7
Press ,QSXW 7 to select the input connected to
,1387 #7
on the projector (S-Video).
This is the same as entering ,QSXW
.
,QSXW
Press ,QSXW
when you want to display from a specific source location, such
as a switcher connected serially to the projector’s switcher port. The first digit
represents the switcher number (usually 1-9, or “0” for one of the four inputs on
the projector), the second digit represents the slot number (1-9). For example:
,QSXW = display data from switcher 1, slot 2.
NOTES: 1) Although you don’t need to use the input key unless a switcher is
connected to the projector, you can also use
,QSXW to access the four input “slots”
on the projector itself: use as the first digit (representing the projector as the
switcher), then
, , , or
as the second digit (the desired input slot
number). in combination with higher numbers is an invalid entry. 2) See 3.5,
Using Channels and Inputs for a detailed explanation of inputs.
&KDQQHO
Press &KDQ to select a channel representing a specific source setup defined and
stored in projector memory. Once you enter a channel number, the display will
automatically update according to the setup parameters defined for that channel.
NOTE: Precise &KDQ key behavior depends on which Channel Selection option
(from within the Preferences menu) you have chosen for the &KDQ key. For
example, you can choose to see a scrollable list of channels when you press &KDQ ,
or you may prefer to enter a one- or two-digit number channel number. To set up
the
&KDQ key, see Preferences later in this section.
6WDQGE\
Press 6WE\ - and hold for a second or two to blank the display and mute the audio
output while keeping the projector in a warmed-up and ready state. Or quickly
press and release
6WE\ - and follow immediately by 21 or 2))
if you want to
guarantee the correct toggle (useful if you are unsure of the present status). Note
that all electronics remain ON in standby mode, even though lamp power
reduces to a minimum and the image turns to black. To leave standby press and
hold
6WE\ - again (or use 6WE\ - 2)) ). Or simply press ([LW .
0HQX
Press 0HQX
to display the main menu. A list of seven numbered options and icons
appears for access to specific functions, such as Channel List or Size / Position.
Press
0HQX
again (or
([LW
) to return to presentation level.
(QWHU
Press (QWHU to select a highlighted item, toggle a checkbox (checked vs.
unchecked), finish with a double slidebar, or accept a parameter adjustment and
return to the previous menu or image.
([LW
Press ([LW to save most parameter adjustments and return to presentation level.
#
,QSXW 7
,QSXW
&KDQ
6WE\ -
###
#
0HQX
##
#
(QWHU
#
([LW