Electrohome VistaGRAPHX 10K, User Manual

Page: 52 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
6057
)LJXUH #60431# 5HVL]LQJ # 0HQX
The first six controls in the resizing menu are described below, followed by a
typical step-by-step manual resizing procedure. To adjust the first six options,
use the
#
or keys to decrease or increase. Press (QWHU to accept the
changes and return to the Resizing submenu (or ([LW to return to presentation
level).
+RUL]RQWDO # 0DUJLQ
Moves the image left or right, essentially by displacing it with the left margin
amount you specify. When moved as far as possible to either side, the image
aligns with the edge without loss or wrapping to the opposite side. Note that the
margin is limited by the size of the image set in Horizontal Display, below.
Range: 0-1023 pixels
9HUWLFDO # 0DUJLQ
Moves the image up or down, essentially by displacing it with the top margin
amount you specify. When adjusted as far as possible up or down, the image
aligns with the edge without loss or wrapping to the opposite edge. Note that the
margin is limited by the size of the image set in Vertical Display, below.
Range: 0-767 lines
+RUL]RQWDO # 'LVSOD\
Stretches or compresses the image horizontally. The value you choose for this
setting determines how many pixels are used across the display. Note that only
even-numbered values can be specified and that the horizontal display setting
cannot be more than twice the horizontal capture setting.
Range: 2-1024 pixels