Electrohome VistaGRAPHX 10K, User Manual, Page: 33 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#;3343 . HU * V # 0DQXDO
608
will be green. If it moves to the
2II
position, the projector will power off —
restart by first moving the breaker back to the
2Q
position, then try powering up
as usual. If the breaker continues to “trip” (moving to
2II
), the projector will
remain inoperable until the AC problem is corrected. Never use the circuit
breaker as an
2Q 2 2II
switch.
;/5 # &211(&7256 #0
"
3-pin and 6-pin. For connecting the optional wired remote
keypad (3-pin) or optional Two-Way controller (6-pin).
+$5' # 5(6(7 ##0
"
Emergency access for powering down the projector in the event
of a system failure. Insert pen point or small screwdriver.
,17(*5$/ # +$1'/( ##0
"
For hoisting (side handles only) or hand transport of the
projector.
67$&.,1* # 68332576 ##0
"
For secure stacking of projectors on the floor (maximum
of three high).
:$51,1*
6WDFN # )/225 0 02817 # SURMHFWRUV # RQO\ 1
(<( # %2/76 #0
"
For safe hoisting / installation of the projector. Attach with at least
20 in. lb. torque.
/$03 # '225 ##0
"
For accessing the lamphouse assembly, such as for replacement.
,17$.( # *5,// #0
"
Louvered area for air intake. Remove to replace 2 air filters.
The Vista
GRAPHX
keypad appears in three locations:
•
Built-in to the rear of the projector
•
Infrared (IR) Remote for tetherless control
•
Wired Remote (optional) tethered to the front of the projector
While each keypad is identical in layout and provides complete control of the
projector, you may find one keypad more convenient than another for your
specific installation and application.
NOTE: For extra long distances and/or harsh environments, you may prefer to
use an optional remote Vista
GRAPHX
2-way Controller to control the projector.
For operating details, please see the 2-Way Controller User’s Manual included
with the controller.
616 8VLQJ # WKH
.H\SDG