Electrohome VistaGRAPHX 10K, User Manual

Page: 118 / 127

Downloaded from Projector.com
237,21$/ # ,1387 # 02'8/(6
) 05
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
)HDWXUHV
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync,
or separate horizontal and vertical sync), up to 500 MHz bandwidth
◊
BNC connectors for RGB signal inputs
◊
RCA connectors for left and right channel audio inputs
The RGB400 Buffered Amplifier Input Module may be installed in a Marquee
signal switcher or Marquee Case/Power Supply. Connect three-, four-, or five-
wire RGB video signals of up to 400 MHz bandwidth, signals typically produced
by high-resolution computer or workstations. The buffering capability of the
module enables the incoming signal to be sent to a remote destination. Inputs are
75
6
terminated.
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync,
or separate horizontal and vertical sync)
◊
BNC connectors for RGB signal inputs
◊
Buffered signals to a remote destination
◊
RCA connectors for left and right channel audio inputs
The RGB400 ALT Input Module may be installed in a Vista
GRAPHX
10K
projector, Marquee signal switcher, or Marquee Case/Power Supply. The
module receives analog RGB input signals from computers or other RGB source
devices. Video inputs are 75
6
terminated. Video outputs are provided for
buffered loop-through to another display device.
)HDWXUHV
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync,
or separate horizontal and vertical sync)
◊
BNC connectors for RGB signal inputs
◊
RCA connectors for left and right channel audio inputs
◊
buffered loop-through video outputs
5*% 733 %$
ö
,QSXW # 0RGXOH
6;0;343660 [[
5*% 733# $FWLYH # /RRS 0 7KUX
ö
,QSXW # 0RGXOH
6;0;343350 [[