Electrohome VistaGRAPHX 10K, User Manual

Page: 54 / 127

Downloaded from Projector.com
23(5$7,21
9LVWD
*5$3+;
#43 . # 8VHU * V # 0DQXDO
6059
67(3 #6#
Adjust both Horizontal and Vertical Display so that the image is sized in
each direction as desired for your application.
NOTE: If the Horizontal Display setting appears to stop prematurely at
too low a setting, it is possible that the current Horizontal Capture
setting is too low and is interfering. If so, increase the Horizontal
Capture first.
67(3 #7#
If necessary, re-adjust Horizontal Margin and/or Vertical Margin until
the image is placed exactly where you want it.
67(3 #8#
Repeat Steps 3 and 4 until you are satisfied with both the size and
placement of the image. If necessary, double-check your main
Horizontal Position and Vertical Position settings in the Size /
Position menu.
3UHVHWV
From the Resizing menu, use “Presets” to quickly display an image in its native
resolution (including anamorphic) or to automatically resize an image to fill the
screen. Capture and/or Display values
will, in turn, automatically change as
necessary without your having to set
them manually.
•
'()$8/7 # 6(77,1* ## ³
When displaying a new source, the default
“Full Screen” option is in effect — NTSC, PAL or SECAM images
will automatically resize to fill the screen vertically. HDTV wide-
screen images (16:9) will automatically resize to fill the screen
horizontally in a 16:9 aspect ratio.
•
:+(1 # ´&86720µ # $33($56 # ³ #
The “Custom” descriptor for the
Preset option appears upon entering the Resizing menu, even if one
of the three presets is currently in effect. “Custom” temporarily
disappears only when you select a preset option, and returns
whenever you re-enter the Resizing menu or manually adjust one of
the Horizontal/Vertical parameters in the Resizing menu.
•
:+(1 # 72 # 6(/(&7 # ´&86720µ # ³ #
Custom as a preset selection
functions chiefly as an “escape” or “exit”. For example, if you are in
the preset pull-down list and decide that you don’t want to select a
preset after all, select “Custom” to escape back to the Resizing menu
without changing the image.
•
6(/(&7 # ´12 # 5(6,=,1*µ
to display the image in its native resolution
rather than resizing the image to use all available pixels in the
projector (1024 x 768). All Capture and Display values will change
accordingly. For example, for a source with a native resolution of
800 x 600, “no resizing” will cause the image to be centered within
a black border — in addition, the Horizontal values for both Capture