manualshive.com logo in svg

Electro Industries Shark 200S, Installation & Operator'S Manual

Share
Download
Electro Industries Shark 200S Installation & Operator'S Manual Download Page 92

     

Doc

#    

E149721     

                              

              5 - 20

5: Communication Installation

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

System Settings 

From this screen, you can do the following:

•  Enable or disable password for Reset (reset max/min Energy settings, Energy 

accumulators, and the individual logs) and/or Configuration (Device profile): click 
the radio button next to Yes or No. 
NOTES: 

•  If you enable a password for reset, you must also enable it for configuration.  

•  The meter’s default is password disabled.

•  Enabling Password protection prevents unauthorized tampering with devices.

When a user attempts to make a change that is under Password protection, 
Communicator EXT opens a screen asking for the password. If the correct 
password is not entered, the change does not take place.

IMPORTANT! You must set up a password before enabling Password protection. 
Click the Change button next to Change Password if you have not already set up a 
password. 

Summary of Contents for Shark 200S





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands