Electro Industries Shark 200S, Installation & Operator'S Manual

Page: 166 / 220

Doc
#
E149721 B - 30
B: Modbus Map and Retrieving Logs
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Param 1-4: These are defined for each event (see following table).
NOTE
: The System Log Record is 20 bytes, consisting of the Record Header (12
bytes) and Payload (8 bytes). The Timestamp (6 bytes) is in the header. Typically,
software will retrieve only the timestamp and payload, yielding a 14-byte record. The
table below shows all defined payloads.
Group
(Event
group) Event
(Event
within
group) Mod
(Event
modifier) Channel
(1-2 for
COMs, 7
for USER,
0 for FW) Parm1 Parm2 Parm3 Parm4 Comments
0 Startup
0 0 0 FW version Meter Run
Firmware
Startup
1 Log Activity
1 log# 1-4 0xFF 0xFF 0xFF 0xFF Reset
2 log# 1-4 0xFF 0xFF 0xFF 0xFF Log Retrieval
Begin
3 log# 0-4 0xFF 0xFF 0xFF 0xFF Log Retrieval
End
2 Clock Activity
1 0 1-4 0xFF 0xFF 0xFF 0xFF Clock Changed
2 0 0 0xFF 0xFF 0xFF 0xFF Daylight Time
On
3 0 0 0xFF 0xFF 0xFF 0xFF Daylight Time
Off
4 sync
method 0 0xFF 0xFF 0xFF 0xFF Auto Clock
Sync Failed
5 sync
method 0 0xFF 0xFF 0xFF 0xFF Auto Clock
Sync Resumed
3 System Resets
1 0 0-4, 7 0xFF 0xFF 0xFF 0xFF Max & Min
Reset
2 0 0-4, 7 0xFF 0xFF 0xFF 0xFF Energy Reset
3 slot# 0-4 1
(inputs)
or 2
(outputs) 0xFF 0xFF 0xFF Accumulators
Reset