25
Auto
Leakage current tester 92-4A / 92-4D / 92-2E
MENU SYSTEM
4.4
Menu Automatic test
For automatic tests the measuring steps are carried out in consequence
automatically. The initial settings of the test are saved in the selected pa-
rameter block. The number of executed measuring steps depends on the
pre-set test mode and further parameters.
Action buttons:
Start
- after actuating the rotary encoder S4 the automatic test run will
be called up and prepared. The measurement is started by operating
the green RUN-button.
Menu buttons:
Change
- the menu for setting the test parameter is displayed, see Chap.
5.5.
Load
- another parameter block can be loaded, see Chap. 4.5.3 "Load
Parameter Block". The next measuring is then carried out with the initial
settings of the newly loaded parameter block.
Save
- the currently set measurements can be stored as new parameter
block in one of the 200 available storages. See Chap. 4.5.4 "Save
Parameter Block".
Illustr. 4.4: Display - Automatic test
