46
Leakage current tester 92-4A / 92-4D / 92-2E
MENU SYSTEM
Change
Illustr. 4.25: Change and activate/deactivate pass words
4.6.7 Change Passwords
Activate and change Passwords for the levels 1, 2, 3 (assignments of the
password steps and predefined passwords - see cape. 3.9). The passwords
for the layers are individually set able.
Activating password protection level 1:
• Select menu item "
Passw. activation lvl. 1"
with rotary encoder S4 ".
• Confirm by pressing the rotary encoder S4.
The Password inquiry of level 1 is displaying.
• Select and enter the characters of the password and confirm by "
↵
" (see
below).
If you leaving the menu „Setup“, the device will ask you „Save the changes?
". At „yes“ the password protection is active (for level 1) after switching on
next time (see cape. 3.9).
The activation of the steps 2 and 3 is carried out in same way.
Change Password e.g. Level 1:
• Select menu item "
Change password level 1"
with rotary encoder S4 ".
• Confirm by pressing the rotary encoder S4.
Illustr. 4.26: Enter old pass word
