Application manual
Air quality multisensor and regulator EK-ES2-TP
Release 1.0 - Updated: 14/02/2020
Application Manual
© EKINEX S.p.A. - All rights reserved
Page 14
3.2
Commissioning
For commissioning purposes, as shown in Picture 4, the device is provided on the front side (in the area usually
occupied by the rocker) of the following elements:
•
a red LED (1) for indication of the active operating mode (LED on = programming, LED off = normal
operation);
•
a pushbutton (2) for switching between the normal and programming operating mode.
Picture 4 - Device programming: led (1) and pushbutton (2)
For the device commissioning, the following activities are required:
•
make the electrical connections;
•
turn on the bus power supply;
•
switch the device operation to the programming mode by pressing the programming pushbutton
located on the front side of the housing. In this mode of operation, the programming LED is turned on;
•
download into the device the physical address and the configuration with the ETS
®
program.
At the end of the download, the operation of the device automatically returns to normal mode; in this mode the
programming LED is turned off. Now the bus device is programmed and ready for use.
2
1
2
2