Ekinex EK-CG2-TP Applications Manual Download Page 74

Page: 74 / 91

Applicatio Manual

Universal Interface 4 DIN/NTC EK- CG2-TP

Revisione 1.0.0 - Aggiornato: 04/09/2017

MAEKCG2TP_EN

Pag. 74

9.10 Energy saving

In order to realize energy-saving functions, window contacts (to detect the opening of windows or doors), presence and

movement sensors and card holders can be used.

The

Energy saving

folder includes the following secondary folders:

•

Window contacts

•

Presence sensors

•

Card holder

9.10 .1 Window contacts

The

Window contacts

secondary folder appears if at least a sensor dedicated to this function is enabled i.e. if the

following condition is verified: External sensors (from bus) Windows contact sensor 1 or 2 (from bus) = enabled

The

Window contacts

folder includes the following parameters:

•

Window contacts function

•

Wait time to building protection mode

9.10.1.1 Parameter and communication object tables

Parameter name

Conditions

Values

Window contacts function

disabled

/ enabled

This parameter enables the window contact function.

Wait time to building protection mode

00:01:00 hh:mm:ss

Window contacts function = enabled

[range 00:00:00 … 18:12:15]

Time interval before the automatic switching of the device to the Building protection
operating mode

Nome oggetto

Conditions

Dim.

Flags

DPT

Comm.

Obj. No.

Windows contact sensor 1
(from bus)

Window contacts function =

enabled,

Window contact 1 = enabled

1 Bit

C-W--

[1.019]

window/door

Windows contact sensor 2
(from bus)

Window contacts function =

enabled,

Window contact 2 = enabled

1 Bit

C-W--

[1.019]

window/door

9.10.2 Presence sensors

The

Presence sensors

folder includes the following parameters:

•

Presence sensor function

•

Presence sensors use

•

Thermostat modes

•

Absence time to switch HVAC mode

Summary of Contents for EK-CG2-TP




























































































Search results

Summary of Contents for EK-CG2-TP

Reviews:

Ekinex EK-CG2-TP, Applications Manual, Page: 74 / 91

Search results

Summary of Contents for EK-CG2-TP

Reviews: