Egholm City Ranger 3070 Operator'S Manual Download Page 65

Page: 65 / 76

Operator’s Manual City Ranger 3070

3.8 Filters - continued

Radiator

1. Stop the vehicle and remove the radiatorcover.

Check the condition of the radiator. Repeat the

check on both side. (Picture 1)

2. If clogged, clean fins with compressed air

(6 Bar).

Additional put the radiatorfan on reverse,

see Section 1.7 Alarm lights and monitoring

indicators, 1. Error and technical menu, page 23.

(Picture 2)

3. If the fins are still clogged, clean them with a

brush and kerosene and dry with compressed air

(6 Bar). (Picture 3)

Air conditioning condenser

To ensure the smooth operation of the condenser,

regularly clean the air conditioning condenser

with an air compressor gun.

1. Clean the fins with compressed air (6 Bar).

If necessary, point the compressed air in the

opposite direction of the cooling air. (Picture 4)

If not possible to clean:

call your Egholm after sales service team.

Compressed air

Radiator

Cover to access at radiator

Brush

Radiator

Air conditioning condenser

Service and maintenance

Summary of Contents for City Ranger 3070













































































Search results

Summary of Contents for City Ranger 3070

Reviews:

Related manuals for City Ranger 3070

Brands by name

Popular brands

Egholm City Ranger 3070, Operator'S Manual

Search results

Summary of Contents for City Ranger 3070

Reviews:

Related manuals for City Ranger 3070

Brands by name

Popular brands