Egholm City Ranger 3070, Operator'S Manual

Page: 38 / 76

38
3
2
1
Operator’s Manual City Ranger 3070
1.14 Mounting an attachment
Connecting and removing attachments
The engine must always be turned off before the
attachment is connected/disconnected.
Make sure that the couplings are clean before
connecting. If not, carefully clean it with a cloth or
similar.
Attention
The couplings and the area around the
couplings must be kept clean to avoid
an accumulation of dirt that could
contaminate the hydraulic system.
(Picture 1+2+3)
Mounting attachments
To mount or remove an attachment, refer to the
operator’s manual for the attachments.
After mounting the attachment, make sure that
the setting within the display keyboard matches
the attachment mounted on the vehicle. Check
display and chosen attachment(s) if not sure,
before starting any operation.
Connecting a trailer with hydraulic tip (Option)
The hydraulic hoses are connected at the rear of
the machine to the C-coupling. (Picture 3)
Attention
With a heavy attachment at the front
of the City Ranger 3070 (eg: mower,
snow sweeper), always drive carefully
and take into account that there is a
loss of grip on the rear wheels.
A-coupling
B-coupling
C-coupling
General information