Egholm City Ranger 3070, Operator'S Manual

Page: 53 / 76

53
3
1
2
Operator’s Manual City Ranger 3070 Operator’s Manual City Ranger 3070
3.2 Engine oil
Only use commercial oils that meet the following
classifications:
• API CJ-4.
• ACEA E9.
• ECF-3.
Standard: 10W-40
NB! Lubricating oil viscosity must be suitable
for the ambient temperature range for the
climate in which the machine is to operate
(Picture 1)
Attention
Always switch off the engine when
checking the oil and when changing
the oil and the oil filter.
Engine oil check
1. Park the City Ranger 3070 on a level surface.
2. Wait for at least 10 minutes after stopping the
engine in order to allow the engine oil to return to
the oil tank.
3. Take the dipstick out, dry and put back.
(Picture 2)
4. Take the dipstick out again to read the oil level.
The oil level must be between MAX. and MIN. on
the dipstick. (Picture 2)
5. In case of lack of oil, remove the filler cap on
the engine. Add oil, wait a few minutes and check
the level again. (Picture 3)
Engine oil filler cap
Viscosity according to temperature
Dipstick MIN MAX
Minimum Maximum
10W-40 −20 °C (−4 °F) 50 °C (122 °F)
SAE 0W30 −30 °C (−22 °F) 30 °C (86 °F)
SAE 0W40 −30 °C (−22 °F) 40 °C (104 °F)
SAE 5W30 −25 °C (−13 °F) 30 °C (86 °F)
SAE 5W40 −25 °C (−13 °F) 50 °C (122 °F)
SAE 10W30 −20 °C (−4 °F) 40 °C (104 °F)
SAE 15W40 −10 °C (14 °F) 50 °C (122 °F)
Service and maintenance