Efka AB620A5035, Operating Manual, Page: 93 / 104

- AB620A5035 Instruction Manual
- 93 -
Parameters Designation Unit Max Min Preset Ind.
294 tF2
Selection of the input function using key (B) “F2” on the
V810/V820 control panel
Functions of the key as with parameter 293, but at setting 0
key F2 is disabled.
100 0 1
297 mSO Custom signal
0 = Function Off
1 = Signal is switched on whenever the light barrier is uncovered
(Pa.131 =1) or covered (Pa 131 =0)
2 = Signal is switched on whenever the light barrier is covered
(Pa.131 =1) or uncovered (Pa 131 =0)
3 = Signal switches on from the light barrier to the seam end.
4 = Signal M11 switches on like with setting 3. However, the signal
M5 (machine running) is switched off during output M11. When
signal M11 is issued, signal M6 (machine at standstill) is also
immediately issued.
3 0 0
298 nSo Backtack synchronization On/Off 1 0 0
299 nrS Stitch locks speed RPM 3000 150 400
328 ob Changing function keys on the control panel
0 = All keys are locked
1 = All keys are released, key
E + start backtack,
key + end backtack (except mode 7)
2 = All keys are released, button E affects chain suction,
impacts tape cutter (only in mode 7)
3 = Button E and no function
4 = 4 = Button E, + and
– no function
5 = Button E affects soft start, impacts tape cutter
and wiper
6 = Button E affects soft start, impacts tape cutter seat
start /end
6 0 1
340 1L Lower switching threshold of input IN1 % 100 0 30
341 1L Upper switching threshold of input IN1 % 100 0 80
342 2L Lower switching threshold of input IN2 % 100 0 30
343 2h Upper switching threshold of input IN2 % 100 0 80
344 3L Lower switching threshold of input IN3 % 100 0 30
345 3h Upper switching threshold of input IN3 % 100 0 80
346 4L Lower switching threshold of input IN4 % 100 0 30
347 4h Upper switching threshold of input IN4 % 100 0 80
348 5L Lower switching threshold of input IN5 % 100 0 30
349 5h Upper switching threshold of input IN5 % 100 0 80
350 6L Lower switching threshold of input IN6 % 100 0 30
351 6h Upper switching threshold of input IN6 % 100 0 80
352 7L Lower switching threshold of input IN7 % 100 0 30
353 7h Upper switching threshold of input IN7 % 100 0 80
360 11L Lower switching threshold of input LSM % 100 0 50
361 11h Upper switching threshold of input LSM % 100 0 70
362 15V 5V/+15V on B18
0 = +5V
1 = +15V
1 0 0
363 Evr Ratchet mech. Interlock on /off (F-290 = 58) 1 0 0 B
364 EWi Ratcheting bracket mech. Interlock (F290 =58) Degrees 100 0 10 B
365 K4S Switching Strobel class (F-290 =56)
0 = Standard Strobel machines
1 = Class 45
2 = VEB100-7 band cutter fixture
2 0 0 B
369 FSL Target setpoint via input PedalC with frequency (AB600A)
0 = AUS
1 = ON / PedalD =Enable
2 = ON / input function 54 = enable
2 0 0 369 FSL
370 n2 Direct input of maximum speed RPM F-111 F-121 Display
374 nrd Reset speed rpm 390 70 100 B
377 tFl Time monitoring foot lifting sec 250 0 0 B
395 Sti Stitch lock on /off (F-290 = 17) 1 0 0 B 395 Sti
396 FSL Target setpoint via input PedalC with frequency
0 = OFF
1 = ON / PedalD = Enable
2 = ON / input function 54 = Enable
2 0 0 0