Efka AB620A5035, Operating Manual

Page: 86 / 104

- AB620A5035 Instruction Manual
- 86 -
Press the E key

Display Min 00
Press the E key

Display SEc 00
Press the E key

Display MSEc 000
Press the E key

Display rES F2
Press the P key twice

Display e.g. Ab620A
179 Sr5 Display of control program number with index and more identification
numbers. The data is displayed in sequence by keystroke.
Display example for the operator control panel:
Press the E key

Display Sr5=
Press the >> key

Display e.g. 5034 (Prog. No.)
Press the E key

Display e.g. A (Index)
Press the E key

Display e.g. 06 (Year)
Press the E key

Display e.g. 10 (Month)
Press the E key

Display e.g. 24 (Day)
Press the E key

Display e.g. 16 (Hour)
Press the E key

Display e.g. --
Press the E key

Display e.g. ----
Press the E key again to restart routine, or press the P key twice to
return to operational status
Display example for the V810 control panel:
Press the E key

Display
Sr [°]
Press the >> key

Display e.g. 5054
Press the E key

Display e.g.
010823
Press the E key

Display e.g. 15
Press the E key

Display e.g.
1F68
Press the P key twice

Display Ab620A
Display example for the V820 control panel:
Press the E key

Display
F-179 Sr5 [°]
Press the >> key

Display e.g. PrG 5054
Press the E key

Display e.g.
dAt 01082315
Press the E key

Display e.g. Chk 1F68
Press the E key

Display e.g.
132650210015
Press the E key

Display e.g.
Skn 01047543
Press the P key twice

Display
4000 Ab620A
180 rd Reversing angle Degrees 359 0 175
181 drd Switch-on start backtack of reverse motor rotation ms 990 0 10
182 Frd Reverse motor rotation On/Off 1 0 0
184 c6 Number of run-out stitches when unlocking the chain Stitches 254 0 20
185 chP Minimum number of stitches for high lift for walking Stitches 254 0 0
190 mEk
Function “unlock the chain” in modes 5, 6 and 7 (Parameter 290)
0 = Unlocking off
1 = Unlocking the chain manually (with pedal in pos.
–2 without
cutting at the seam end)
2 = Unlocking the chain automatically
- By means of light barrier or
- pedal in pos.-2 (Parameter 019) without cutting at the seam end
3 = Unlocking the chain automatically
- By means of light barrier or
- Pedal in pos.
–2 (Parameter 019) with cutting and run-out stitches
(Parameter 184) at the seam end, then unlocking the chain (only if
parameter 290 = 7)
4 = Unlocking only with pedal 2
No unlocking the chain at the seam end by means of light barrier,
cutting and run-out stitches.
4 0 1
191 mhE Seam end for overlock mode through
End count c2 or c4
0 = Seam end after count c4
– Tape cutter
1 = Seam end after count c2
– chain suction
1 0 0
192 PLS Speed of the light barrier compensating stitches
0 = Speed n5 after light barrier sensing
1 = Speed pedal controlled 1 0 0