3
3-18
Setting up the Pi6500 Pro from a Windows Computer
PServer Setup (NetWare Services)
The Enable PServer option must be turned on if you have a Novell server connected.
You can, however, change the PServer polling interval and then modify either Bindery
Setup or NDS Configuration.
N
OTE
:
The terms NetWare server, Novell server, and IPX server are in common use and
are used here interchangeably to mean the server on an IPX network running Novell
NetWare networking software.
PServer Setup (NDS Configuration
)
In initial setup, the Pi6500 Pro was connected to the network and an NDS directory
tree, with a Printer, a Print Server, and one or more Print Queue objects for Pi6500 Pro
jobs (see page 4-7), was configured. You can make any changes to that setup through
Command WorkStation. To modify NDS Setup, you may need permission to browse
the NDS tree. If access to the Print Server is restricted, you need a login password.
Enable NDS
Check this box if NDS has already been enabled on the network.
Change Trees...
Click to open the NDS Configuration window. This option is available only when
Enable NDS is selected.
Add NDS Tree
You can have only one NDS tree, so the following process is required to change
trees:
1.
Select the current NDS tree and click Remove.
2.
Select the new NDS tree and click Add.
Your new NDS tree selection automatically overwrites any previous tree
selection. If you change the NDS tree selection and there are also current
Bindery settings, you are alerted that they will be deleted. If you
continue with NDS Setup, you can replace Bindery settings afterwards.
To exit NDS Setup, choose Cancel.
3.
Click OK.
The Select User Login window appears.
