3
3-3
Server Setup
Enable Printed Queue
—Specify whether to enable the Printed Queue, a storage
location on the Pi6500 Pro disk for recently printed jobs. You can reprint jobs from
the Printed queue without sending them to the Pi6500 Pro again. If the Printed queue
is not enabled, jobs are deleted from the Pi6500 Pro disk immediately after they are
printed.
Jobs Saved in Printed Queue
—Specify the number of jobs to be stored in the Printed
Queue. Jobs in the Printed queue take up space on the Pi6500 Pro hard disk.
Date & Time
—Specify the system date and time, which are used on the cover page and
on Job Logs.
Delete Scan Jobs
—Specify how often to delete scan jobs from the Pi6500 Pro hard
disk. Use the “Delete Scan Jobs Now” button to delete scan jobs now.
Use Character Set
—Specify whether the Control Panel and the job management tools
should use the Macintosh, DOS, or Windows character set for displaying filenames.
This is important if a filename includes accented or composite characters (such as é
or æ). For mixed-platform networks, select the setting that gives the best overall
representation of the special characters you use.
Passwords
You can set, change, and remove passwords for the Pi6500 Pro. Keep careful track of
the passwords you set for each.
Administrator
—Controls access to Setup; Administrator privileges also include
Operator privileges.
N
OTE
:
The administrator password also controls printer driver defaults for printer
drivers installed with Point and Print on Windows NT 4.0 clients. For information on
installing printer drivers with Point and Print, see Getting Started.
Operator
—Controls access to job management functions via the job management
tools.
