2
2-4
Setting up the Pi6500 Pro
T
O
ACCESS
S
ETUP
WHEN
THE
P
I
6500 P
RO
IS
AT
I
DLE
Review the settings described in this chapter. For more information on Control Panel
screens other than those in Setup, see the Printing Guide.
About the Control Panel Setup interface
When you restart the Pi6500 Pro and choose Run Setup, you can select one menu after
another and enter information about your Pi6500 Pro and your network and printing
environment. In each Setup, the last line of the display window displays the name of
the current Setup menu.
1.
When the Pi6500 Pro displays the Idle screen, press the Menu button on the Control
Panel to go to the Functions menu.
2.
Scroll the menu and press the line selection button to choose Run Setup.
If an Administrator password has been set on the Pi6500 Pro, you are prompted to
enter it before you can perform Setup (see page 2-45).
3.
Press the line selection button to choose a Setup menu or command.
Press the down button to view the other screens of the main Setup menu.
4.
Choose Setups in the same order as they appear in the menu: Server Setup, Network
Setup, Printer Setup, PS Setup, PCL Setup, and then Job Log Setup.
The sequence is important for first-time Setup. Later, just go directly to the menu
you want to change. However, if you make changes in Network Setup, you may
need to change some settings in Printer Setup as well.
N
OTE
:
If you make changes in Server, Network, or Printer Setup, you need to
update the system configuration by opening and saving the other Setups even if
you have not changed any other settings.
Run Setup
Functions
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
PS Setup
PCL Setup
Job Log Setup
Change Password
Setup
Clear Server
Setup
Setup
