2
2-11
Network Setup options
4.
To use Ethernet, choose Ethernet Setup from the Port Setup menu, and enter the
appropriate settings.
5.
If the Token Ring option is installed, choose Token Ring Setup and enter the
appropriate settings.
6.
To print to the parallel port, choose Parallel Port Setup from the Port Setup menu, and
enter the appropriate settings.
7.
When you have finished entering port settings, choose Exit Port Setup and then choose
Protocol Setup.
8.
Enter the appropriate settings for the protocol or protocols you will use.
9.
When you have finished entering protocol settings, choose Exit Protocol Setup and
then choose Service Setup.
10.
Enter the appropriate settings for the services you will use.
The options are described in detail in the following pages.
T
O
EXIT
N
ETWORK
S
ETUP
1.
When you have finished entering service settings, choose Exit Service Setup, then Exit
Network Setup.
2.
Choose Yes when prompted to save changes.
3.
From the main Setup menu, choose another Setup or choose Exit Setup.
Port Setup options
You can enable Ethernet or Token Ring (if the Token Ring option is installed), but
not both at the same time. You can also enable parallel communication
simultaneously with either Ethernet or Token Ring. To configure the Pi6500 Pro,
choose each port type you use and enter the settings for that port. Since network
Setups are nested, the names of higher-level menus are shown in this chapter to the
left of each menu heading.
Exit Port Setup
Ethernet Setup
Token Ring Setup
Parallel Port Setup
Port Setup
