![EFI FIERY X3eTY 35C-KM Service Manual Download Page 16](http://html1.mh-extra.com/html/efi/fiery-x3ety-35c-km/fiery-x3ety-35c-km_service-manual_2367289016.webp)
8
Shut down
T
O
SHUT
DOWN
THE
F
IERY
X3
E
TY
1.
Press the Utility/Counter button on the Control Panel and then touch the Controller
Details key on the copier touch panel Utility screen.
Alternatively, touch the
icon in the lower-left corner of the copier touch panel.
2.
Make sure that the Fiery displays Idle.
F
IGURE
D
Fiery X3eTY LCD info screen
3.
Press MENU to access the Functions screen.
4.
Select Shut Down from the Functions screen.
5.
Select Shut Down System from the Shut Down screen.
6.
Wait until the Utility screen appears.
The Utility screen may take a few minutes to appear. Note that the Controller Details
key no longer appears.
7.
Power off the Fiery X3eTY using the dedicated AC power switch or the Soft power button
(see Figure C on page 6).
N
OTE
:
Always use the AC power switch when you are preparing either to disconnect the
cables between the Fiery X3eTY and the print engine or to unplug the Fiery X3eTY from
the AC power outlet. Pressing the Soft power button powers off the Fiery X3eTY but not
completely. The Fiery X3eTY requires a complete power off before you disconnect the
cables.
If you are recycling power, wait at least five seconds before powering back on.
8.
If you are preparing to remove the Fiery X3eTY from the print engine, power off the
print engine using its main power switch and then unplug the print engine.
N
OTE
:
Do not perform this step if you are shutting down the Fiery X3eTY in order to
install system software.
Unplugging the print engine powers off the Fiery power supply. If the print engine is
plugged in and connected to the Fiery X3eTY, the Fiery X3eTY power supply remains
on even when the print engine and the Fiery X3eTY are powered off. For more
information, see the service documentation for 35C-KM print engines.
Fiery X3e
Idle
xxxxMB Vx.x
MENU
Info
Close
Fiery X3eTY status
(Idle, RIP, etc.)
MENU key
Name of screen (Info,
Functions, etc.)
4 line selection keys
(use to select
corresponding menu
item)
Up and Down arrows
(use to scroll the
display)
Close key (use to
return to the Utility
screen)