Edge-Core ES4528V-38, Management Manual, Page: 324 / 396

C
HAPTER
23
| ACL Commands
– 324 –
7 1
8 1
9 1
10 1
11 1
12 1
13 1
14 1
15 1
ACL>
acl action
This command displays or sets the default action for specified ports,
including permit/deny, rate limiters, port copy, logging, and shutdown.
S
YNTAX
acl action [ port-list ] [ permit | deny ] [ rate-limiter ] [ port-copy ]
[ logging ] [ shutdown ]
port-list - A specific port or range of ports. (Range: 1-28, or all )
permit - Permits a frame if it matches a rule defined in the
assigned policy (see the acl policy command on page 325 ).
deny - Denies a frame if it matches a rule defined in the assigned
policy (see the acl policy command).
rate-limiter - Specifies a rate limiter (see the acl rate command on
page 325 ) to apply to the port. (Range: 1-15, or disable )
port-copy - Defines a port to which matching frames are copied.
(Range: 1-28, or disable )
logging - Enables logging of matching frames to the system log.
(Options: log or log_disable )
Use the system log command ( page 207 ) to view any information
stored in the system log for this entry. Related entries will be
displayed under the “info” or “all” logging levels.
shutdown - Shuts down a port when a matching frame is seen.
(Options: shut or shut_disable )
D
EFAULT
S
ETTING
Forwarding: Permit
Rate Limiter: Disabled
Port Copy: Disabled
Logging: Disabled
Shutdown: Disabled
E
XAMPLE
ACL>action 9 permit 1 15 log shut
ACL>