Edge-Core ES4528V-38, Management Manual, Page: 157 / 396

C
HAPTER
5
| Monitoring the Switch
Displaying Information on Authentication Servers
– 157 –
D
ISPLAYING
I
NFORMATION ON
A
UTHENTICATION
S
ERVERS
Use the Monitor/Authentication pages to display information on RADIUS
authentication and accounting servers, including the IP address and
statistics for each server.
D
ISPLAYING A
L
IST OF
A
UTHENTICATION
S
ERVERS
Use the RADIUS Overview page to display a list of configured
authentication and accounting servers.
P
ARAMETERS
These parameters are displayed on the RADIUS Overview page:
◆
IP Address - The IP address and UDP port number of this server.
◆
Status - The current state of the server. This field takes one of the
following values:
■
Disabled - The server is disabled.
■
Not Ready - The server is enabled, but IP communication is not yet
up and running.
■
Ready - The server is enabled, IP communication is up and
running, and the RADIUS module is ready to accept access
attempts.
■
Dead (X seconds left) - Access attempts were made to this server,
but it did not reply within the configured timeout. The server has
been temporarily disabled, but will be re-enabled when the dead-
time expires. The number of seconds left before this occurs is
displayed in parentheses.