Edge-Core ES4528V-38, Management Manual, Page: 237 / 396

C
HAPTER
12
| Port Commands
– 237 –
E
XAMPLE
Port>flow control 5 enable
Port>flow control 5
Port Flow Control Rx Pause Tx Pause
---- ------------ -------- --------
5 Enabled Enabled Enabled
Port>
port maxframe
This command displays or sets the maximum frame size allowed for a port.
S
YNTAX
port maxframe [ port-list ] [ max-frame ]
port-list - A specific port or a range of ports. (Range: 1-28, or all )
max-frame - The maximum transfer unit for traffic crossing a port.
(Range: 9600-1518 bytes)
D
EFAULT
S
ETTING
9600 bytes
E
XAMPLE
Port>maxframe 5 1518
Port>
port power
This command displays or sets the power provided to ports based on the
length of the cable used to connect to other devices. Only sufficient power
is used to maintain connection requirements.
S
YNTAX
port power [ port-list ] [ enable | disable | actiphy | perfectreach ]
port-list - A specific port or a range of ports. (Range: 1-28, or all )
enable - Both link up and link down power savings enabled.
disable - All power savings mechanisms disabled.
actiphy - Link down power savings enabled.
perfectreach - Link up power savings enabled.
D
EFAULT
S
ETTING
Disabled
C
OMMAND
U
SAGE
IEEE 802.3 defines the Ethernet standard and subsequent power
requirements based on cable connections operating at 100 meters.