Edge-Core ES4528V-38, Management Manual, Page: 264 / 396

C
HAPTER
15
| RSTP Commands
– 264 –
RSTP>status 1
RSTP Bridge Status
Bridge ID : 40960-00:01:C1:00:00:E1
Root ID : 32768-00:01:EC:F8:D8:C6
Root Port : 1
Root Cost : 200000
TC Flag : Steady
TC Count : 161
TC Last : 0d 01:10:47
Port Port Role State Pri PathCost Edge P2P Uptime
--------- -------------- ---------- --- -------- ---- --- ------------
1 DesignatedPort Forwarding 128 200000 Yes Yes 0d 03:03:10
LLAG1 DesignatedPort Forwarding 128 100000 No Yes 0d 00:02:23
LLAG2 DesignatedPort Forwarding 128 100000 No Yes 0d 00:00:21
RSTP>
rstp statistics
This command displays RSTP statistics on protocol messages for any
specified ports and link aggregation groups.
S
YNTAX
rstp statistics [ port-list ]
port-list - A specific port or range of ports. (Range: 1-28, or all )
E
XAMPLE
This example displays RSTP statistics for port 1 and LAG1. For a description
of the items displayed in this example, refer to “Displaying Port Statistics
for STA” on page 169 .
RSTP>statistics 1
Port Rx RSTP Tx RSTP Rx STP Tx STP Rx TCN Tx TCN Rx Ill. Rx Unk.
--------- -------- -------- ------- ------- ------- ------- ------- -----
1 943 8774 2587 3 0 1 0 0
LLAG1 5 5041 1 2560 2 1 0 0
RSTP>
rstp mcheck
This command performs RSTP protocol migration check for specified ports.
S
YNTAX
rstp mcheck [ port-list ]
port-list - A specific port or range of ports. (Range: 1-28, or all )
C
OMMAND
U
SAGE
◆
This command re-checks the appropriate BPDU format to send on the
selected interface.
◆
If at any time the switch detects STP BPDUs, including Configuration or
Topology Change Notification BPDUs, it will automatically set the
selected interface to forced STP-compatible mode. However, you can
also use this command at any time to manually re-check the