Edge-Core ES4528V-38, Management Manual, Page: 235 / 396

C
HAPTER
12
| Port Commands
– 235 –
port state
This command displays the administrative state, or sets it enabled or
disabled.
S
YNTAX
port state [ port-list ] [ enable | disable ]
port-list - A specific port or a range of ports. (Range: 1-28, or all )
enable - Enables the specified ports.
disable - Disables the specified ports.
D
EFAULT
S
ETTING
Enabled
C
OMMAND
U
SAGE
This command allows you to disable a port due to abnormal behavior
(e.g.,excessive collisions), and then re-enable it after the problem has
been resolved. You may also want to disable a port for security reasons.
E
XAMPLE
Port>state 5 disable
Port>
port mode
This command displays or sets port speed and duplex mode of a port.
S
YNTAX
port mode [ port-list ] [ 10hdx | 10fdx | 100hdx | 100fdx | 1000fdx
| auto ]
port-list - A specific port or a range of ports. (Range: 1-28, or all )
10hdx - Supports 10 Mbps half-duplex operation
10fdx - Supports 10 Mbps full-duplex operation
100hdx - Supports 100 Mbps half-duplex operation
100fdx - Supports 100 Mbps full-duplex operation
1000fdx - Supports 1 Gbps full-duplex operation
auto - Enables auto-negotiation. When using auto-negotiation, the
optimal settings will be negotiated between the link partners based
on their advertised capabilities.
D
EFAULT
S
ETTING
Auto-negotiation