Edge-Core ES4528V-38, Management Manual, Page: 141 / 396

C
HAPTER
4
| Configuring the Switch
Simple Network Management Protocol
– 141 –
C
ONFIGURING
SNMP
V
3 G
ROUP
A
CCESS
R
IGHTS
Use the SNMP Accesses Configuration menu to assign portions of the MIB
tree to which each SNMPv3 group is granted access. You can assign more
than one view to a group to specify access to different portions of the MIB
tree.
P
ARAMETERS
The following parameters are displayed on the SNMPv3 Access
Configuration page:
◆
Group Name - The name of the SNMP group. (Range: 1-32 characters,
ASCII characters 33-126 only)
◆
Security Model - The user security model. (Options: any, v1, v2c, or
the User-based Security Model – usm; Default: any)
◆
Security Level - The security level assigned to the group:
■
NoAuth, NoPriv - There is no authentication or encryption used in
SNMP communications. (This is the default for SNMPv3.)
■
Auth, NoPriv - SNMP communications use authentication, but the
data is not encrypted.
■
Auth, Priv - SNMP communications use both authentication and
encryption.
◆
Read View Name - The configured view for read access. (Range: 1-32
characters, ASCII characters 33-126 only)
◆
Write View Name - The configured view for write access.
(Range: 1-32 characters, ASCII characters 33-126 only)