Eddyfi Technologies LYFT, User Manual

Page: 97 / 123

Connector reference
| 81
Table A-4 Ethernet connector pinout
Pin I/O Signal Description
1 Bidirectional Bi_DA+ Bidirectional pair A+
2 Bidirectional Bi_DA– Bidirectional pair A–
3 Bidirectional Bi_DB+ Bidirectional pair B+
4 Bidirectional Bi_DC+ Bidirectional pair C+
5 Bidirectional Bi_DC– Bidirectional pair C–
6 Bidirectional Bi_DB– Bidirectional pair B–
7 Bidirectional Bi_DD+ Bidirectional pair D+
8 Bidirectional Bi_DD– Bidirectional pair D–
Important
Lyft must be linked to a workstation with a category 5e, shielded, Ethernet cable or better of a
maximum length of 100 m (328 ft).
HDMI Connector
The HDMI connector is used to output video from Lyft to an external display. International HDMI
standards are applied.
Table A-5 HDMI connector data
Type HDMI, female
Manufacturer P/N
Tyco Electronics 2007435-1
Eddyfi P/N MACN4039
Table A-6 HDMI connector pinout
Pin Signal Description
1 TMDS Data2+ Transition minimized differential signaling (TMDS) positive data 2
2 TMDS Data2 Shield TMDS data 2 shield
3 TMDS Data2– TMDS negative data 2
4 TMDS Data1+ TMDS positive data 1
5 TMDS Data1 Shield TMDS data 1 shield
6 TMDS Data1– TMDS negative data 1
7 TMDS Data0+ TMDS positive data 0
8 TMDS Data0 Shield TMDS data 0 shield
9 TMDS Data0– TMDS negative data 0
10 TMDS Clock+ TMDS positive clock
11 TMDS Clock Shield TMDS clock shield
12 TMDS Clock– TMDS negative clock
13 NC Not connected
14 NC Not connected
15 SCL I
2
C serial clock for data display channel (DDC)
16 SDA I
2
C serial data line for DDC