Eddyfi Technologies LYFT, User Manual

Page: 59 / 123

Workflow overview
| 43
Adding Indications to a report
1. If there are any, discard invalid data points near the defect that you want to add.
2. Move the cursor over the target defect.
Figure 3–15 Placing cursor over target defect
3. Resize the cursor’s crosshairs so that it covers the entire defect.
4. Click Add Indication .
The Add Indication dialog box appears.
Figure 3-16 Add indication dialog box
5.
On the Indication list, select the type of corrosion.
6. To compute the CWT , when available, click Compute .
•
If the defect is close to a feature that may affect the sizing. A flange for example. You may
tap the
Mass Effect checkbox and select the direction in which the feature is before
computing the CWT .
7.
If necessary, add a comment.
8. Click OK .
The defect boundaries and compensated wall thickness appear on C-scan.¸