Eddyfi Technologies LYFT, User Manual

Page: 54 / 123

38 | eddyfi.com
Applying SmartPULSE
TM
Quick Procedure
1. In the front stage, on the Home or Setup ribbon, tap SmartPULSE .
Figure 3–10 SmartPULSE dialog box
2. Place your probe on the nominal area of the component under test.
3. In the SmartPULSE dialog box, tap Launch .
4. At the end of the routine, in the Available averaging settings list, tap the appropriate point
toreach the desired repeatabilityé
5. tap Apply.
Detailed Procedure
1. In the front stage, on the Setup ribbon, tap PEC Autoset .
The PEC Autoset dialog box opens. The Jacket Delay and Characteristic Decay Time values are
configured according to your component configuration.