SE-1201 Electrocardiograph User Manual Transmitting ECG Data
- 68 -
7.1.2 Transmitting ECG Data in SCP/FDA-XML/PDF Format
through
Ethernet
Cable
NOTE:
SCP/FDA-XML function can be activated on the
Advanced Setup
screen. For
details, please contact the manufacturer or the local distributor.
1.
Log into the FTP receiving software.
2.
Connect the electrocardiograph to the network of the PC with an Ethernet cable
recommended by the manufacturer.
NOTE:
1)
If the wireless AP transmission is used, please refer to the user manual delivered
with the wireless AP.
2)
There should be no shield in or around the room where the wireless AP is used, or
else the wireless transmission may fail.
3.
Configure the
Transmission Setup
window.
1)
Set
Auto Transmission
to
On
.
2)
Set IP addresses
For details, please refer to Section 7.1.1 “Transmitting ECG Data in DAT Format
through Ethernet Cable”.
3)
Set the
FTP User Name
,
FTP Password
and
FTP Path
items.
a)
The user name and the password you input in the
FTP User Name
and
FTP
Password
items must be available for FTP server.
b)
The path you input in the
FTP Path
item must be the subdirectory of the path you
input in the FTP receiving software.
NOTE:
For more information about FTP server, see your Network Administrator.
3.
Set file format to SCP/FDA-XML/PDF
1)
Select
Setup>
File
to open the
File Setup
window.
2)
Select a desired format from the
File Format
list box.
