SE-1201 Electrocardiograph User Manual Basic Operation Guidance
- 42 -
4.4 Work Mode Description
There are five work modes in SE-1201.
AUTO:
In the auto mode, the ECG data can analyzed, saved, printed and transmitted. The
lead groups are switched automatically according to the lead sequence during the
printing course. After the ECG waves of one lead group are printed within a certain
time, the system switches to print ECG waves of another lead group automatically.
1mV calibration marks will be printed at the beginning of an ECG report.
MANU:
In the manual mode, you can determine the lead group to be displayed and printed.
Pressing the Left or Right arrow can switch among the lead groups.
RHYT:
In the rhythm mode, the ECG data can be saved and transmitted. You can print 60s
rhythm-lead ECG waveform of one lead in the
Single Lead
style or 20s rhythm-lead
ECG waveform of three leads in the
Three Leads
style.
R-R:
In the R-R analysis mode, you can select a lead to print its R-R histogram, R-R trend
chart, 180s compressed ECG waveform and all the R-R interval values.
OFF:
In the off mode, the ECG data can be analyzed, saved and transmitted, but can not
be printed, which is the only difference between AUTO and OFF mode.
For details on printing ECG reports in the Auto, Manual, Rhythm or R-R analysis mode, please
refer to Section 6.1 “Printing an ECG Report”.
