SE-1201 Electrocardiograph User Manual Basic Operation Guidance
- 35 -
Name
Explanation
A Name
Patient Name: within 60 ASCII characters or the equivalent
number of other characters that can be supported by equivalent
memory used by 60 ASCII characters
B ID
When
ID Mode
is set to
Manual
, the patient ID is within 30
ASCII characters.
When
ID Mode
is set to
Auto
, the patient ID is 0~1999, 999,
999.
When
ID Mode
is set to
Time
, the patient ID can be
automatically generated according to the time when you press
the
PRINT/STOP
key to print an ECG report. Entering the
patient ID manually is not supported.
C Age
Patient Age
The patient age value and the age unit can be set in the
Patient
Information
window.
D
Gender
Patient Gender (Male/Female/Cleared)
E
Hint Information 1
Including
DEMO
,
Module Error
,
Overload
, Lead Name (When
the leads are off, the lead names will be shown in black on a
yellow background.) For details, please refer to Chapter 11
“Hint Information”.
F
Hint Information 2
Including
No Paper
,
Paper Error
,
Battery Weak
,
Sampling
,
Analyzing
,
Recording
,
Testing,
Learning
,
Transmitting
,
Transmit Fail
,
Detecting
,
Memory Full
,
U Disk
,
SD Card,
USB
Printer
,
Lead Off
,
USB Scanner.
For details, please refer to
Chapter 11 “Hint Information”.
G
Work Mode
Manual, Auto, Rhythm, R-R Analysis or Off
H
Heart Rate
Actual Heart Rate
I Current
Time
Current examination time. Refer to Section 10.9, “Date & Time
Setup”.
J
Battery Symbol
Identify the current capacity of the battery
K
Press to open the main screen2.
L Filter
EMG Filter: 25Hz, 35Hz or 45Hz
Lowpass Filter: 75Hz, 100Hz or 150Hz
NOTE:
This setup modified on the main screen is only
effective for the current patient.
