Ecosys M6526cdn Type B, Operation Manual

Page: 67 / 206

FAX Operation (Advanced)
4-7
4
Interrupt Send
During communication, when you scan originals by selecting direct transmission, you can use interrupt send.
Even when the communication is prolonged due to broadcast transmission or a next transmission being
scheduled, the machine will first send originals for which interrupt send has been set.
NOTE:
When the number of standby transmissions and delayed transmissions has already reached 30, you
cannot use interrupt send.
Depending on the timing of the interruption, you may not be able to interrupt transmission immediately.
1
Press the FAX key.
2
Load the originals to be sent using Interrupt Send.
3
Press the Function Menu key.
4
Press the  or  key to select [FAX Direct TX].
5
Press the OK key.
6
Press the  or  key to select [On].
7
Press the OK key.
8
Set the destination, and press the Start key. The
panel display will switch to the standby screen, and
the transmission will start when transmission
becomes possible.
NOTE:
When On is selected in Destination Check
before Send , a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-13 .
For operation of direct transmission, refer to Selection
of Transmission Method on page 3-2 .
To cancel transmission while waiting for interrupt send,
press the
Stop key on the operation panel. For details,
refer to Cancelling Communication on page 3-12 .
9
When the interrupt send is completed, the
canceled communication and standby
transmission will automatically resume.