Ecosys M6526cdn Type B Operation Manual Download Page 55

Page: 55 / 206

FAX Operation (Basic)

3-25

When deleting the destination of a contact
registration or group

Press the





key to select [Delete].

Press the

key.

Press [Yes] (the

Left Select

key). This deletes

the selected destination or group.

Press the

key.

Press [Yes] (the

Left Select

key). The change or

deletion of the registration contents is reflected on
the Address Book.

Printing Address List

You can print the list of destinations registered in the Address Book.

You can sort the list in the order of names or address numbers of the destinations.

Press the

System Menu/Counter

key.

Press the





key to select [Edit Destination].

Press the

key.

Press the





key to select [Print List].

Press the

key.

Press the





key to select [FAX List(Index)] or

[FAX List(No.)].

Press the

key.

Press [Yes] (the

Left Select

key). The list is

printed.

Summary of Contents for M6526cdn Type B















































































































































































































Search results

Summary of Contents for M6526cdn Type B

Reviews:

Ecosys M6526cdn Type B, Operation Manual, Page: 55 / 206

Search results

Summary of Contents for M6526cdn Type B

Reviews: