ECKELMANN Compact GLT 3010 Operating Instruction Download Page 70

Page: 70 / 119

Firmware: V2.18 / V--

26.10.2022

70/119

9.1.1 Mounting on the DIN rail

Step 1:

Underside of the controller (with mating connectors removed) with the two claws for mounting:

Step 2:

Place the controller on the upper edge

(1.)

of the DIN rail

(A)

and swivel it downwards

(2.)

until the

controller snaps firmly onto the DIN rail.

DANGER

Warning about dangerous electrical voltage! Danger of electric shock!

The safety regulations and

work safety instructions

must

be observed for the mounting.

All

plug connectors may only be inserted

and removed when the power supply is disconnected, see chapter

Handhabung breiter COMBICON-

Stecker



In order to ensure mounting / removal, a clearance of at least 30 mm to the next component (e.g. cable
duct)

must

be maintained underneath the controller.

Note:

The DIN rail (35 mm) must have a height of at least 5 mm.



Summary of Contents for Compact GLT 3010
























































































































Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands

ECKELMANN Compact GLT 3010, Operating Instruction

Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands