ECKELMANN Compact GLT 3010 Operating Instruction Download Page 58

Page: 58 / 119

Firmware: V2.18 / V--

26.10.2022

58/119

7.4 Changes of GLT 5010 compared to GLT 3010

The data point description is embedded in the CODESYS program of the GLT 5010. The controller, together

with the system centre, then takes care of the distribution in the system.

With the Signal List Tool (per controller), CODESYS export files with the name "EA_DDC_

_config.exp" are

created.

The respective file is imported as usual.

Under "Resources → Global Variables → Signal List → GLTCFG" you will then find the two structure fields

gltcfg1 and gltcfg2.

As a last step, the pointers to the structure fields must be made known

once

to the operating system of the

controller via the function Set_GLTCFG(). In the example application, the module INIT_T is suitable for this
purpose:

When starting the controller, or more precisely: the CODESYS application, the operating system then
automatically transfers the complete configuration file "GLT.CFG" to the system centre CI 5x00 or Virtus.

Summary of Contents for Compact GLT 3010
























































































































Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands

ECKELMANN Compact GLT 3010, Operating Instruction

Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands