ECKELMANN Compact GLT 3010 Operating Instruction Download Page 54

Page: 54 / 119

Firmware: V2.18 / V--

26.10.2022

54/119

•

7.1 Starting the tool and settings

There are two ways to start the tool

Double click on the file with the name "~.sigcfg" (preferred method)
The Signal List is loaded automatically.
Direct start of the tool

The Signal List must be selected via the menu [File → Select].

7.2 Menu functions

File menu

Selection

Description

Select

Select and load a new Signal List manually.

Reinitialise

The tool must be reinitialised if new columns have been inserted in the Signal List or
their sequence has been changed.

Output Menu

Determines which system centre and controller are used.

Selection

GLT type

→

CI 3000

= GLT 3010

→

CI 4000

= GLT 3010

→

Virtus 5 / CODESYS 2.3

= GLT 5010

Note

The Signal List must be linked to this file extension to start via the sigcfg file.

The link is set up by calling up the menu item "Tools → Bind .sigcfg". The program must have previously

been started with administrator rights.

Summary of Contents for Compact GLT 3010
























































































































Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands

ECKELMANN Compact GLT 3010, Operating Instruction

Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands