ECKELMANN Compact GLT 3010 Operating Instruction Download Page 42

Page: 42 / 119

Firmware: V2.18 / V--

26.10.2022

42/119

1.
2.

6.1 Formal structure of the Signal List

The Signal List must have a certain formal structure so that the Signal List Tool can generate the source code
files for CODESYS and the GLT Config for the system centre without errors:

The first cell in Excel,

, must contain the marker $$ so that the following functions are available.

There are markers in

row 1

that indicate the function of the relevant columns. This means that the meaning

of the information can be distributed to the columns as desired.
The area containing valid data is framed by the abbreviations $START and $ENDE.

The following screenshot shows an extract from the beginning of a Signal List:

Summary of Contents for Compact GLT 3010
























































































































Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands

ECKELMANN Compact GLT 3010, Operating Instruction

Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands