ECKELMANN Compact GLT 3010 Operating Instruction Download Page 55

Page: 55 / 119

Firmware: V2.18 / V--

26.10.2022

55/119

•

Configuration menu

Note:

The settings of this menu item should not be changed, as they are only intended for special

applications.

Tools Menu

The "Tools" menu contains useful tools:

Selection

Description

Diagnose

Among other things, the version number and the installation directory of the Signal
List Tool are displayed here.

Format

Reformats the Signal List in Excel. See Formatting Information

Distribute flags

Automatically distributes the addresses for newly added flags/setpoints in the
Signal List. Flags with already assigned addresses remain unaffected.

Distribute flags NEW

Automatically distributes the addresses for newly added flags/setpoints in the
Signal List. Flags with already assigned addresses remain unaffected.

Bind .sigcfg

Binds the tool to the Signal List with the ".sigcfg" extension. This means that a
double click on this file is sufficient to open the Signal List and the tool.

Summary of Contents for Compact GLT 3010
























































































































Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands

ECKELMANN Compact GLT 3010, Operating Instruction

Search results

Summary of Contents for Compact GLT 3010

Reviews:

Related manuals for Compact GLT 3010

Brands by name

Popular brands