GB
GB
93
2. Wash the cooking vessel
0
, aluminium cover
8
and the aluminium cover seal
9
in warm water with
detergent. Rinse off the detergent well and dry everything thoroughly.
3. Remove carefully the valve
1
and disassemble the cover of the pressure valve mechanism
7
. Clean it in
warm water with detergent and rinse it under running water, dry it and replace it.
4. Clean the floating pressure indicator
4
and its seal.
Accessories
•
Wash all accessories in warm water with detergent.
•
Rinse off the detergent well and dry everything thoroughly.
Remove the inner aluminium cover from the lid
8
and rinse it thoroughly. Remove the circular seal
9
, wash it
thoroughly with water and dry. Then replace the seal.
Floating pressure
indicator
Floating pressure
indicator seal
TROUBLESHOOTING
Problem
Cause
Solution
No indicator is lit.
The appliance is not on.
Check, if the power supply cable is properly
plugged in and that the electric outlet is
under voltage.
Check, if the appliance’s switch is on.
The seal is not properly installed. Insert the seal correctly.
Cannot loosen the lid.
The safety pin
5
is blocked
by the floating pressure
indicator
4
.
Move the safety pin manually.
Cannot open the lid.
The floating pressure indicator
is not in the low position even
when the pressure drops.
Using a toothpick or skewer, gently push the
floating valve down.
The lid leaks.
The lid is not entirely closed.
Close the lid properly.
The seal is not inserted in the lid. Insert the seal properly.
There are food remains on
the seal.
Clean the seal.
The seal is damaged.
Replace the seal with a new one.
