5. Seat the direct ring fully on the low speed pins
by pushing down and twisting to compress the
springs.
D. To Install the Synchronizer and Range
Shift Air Cylinder Assemblies.
3.
4.
1.
2.
Place the shifting yoke on piston shaft, long hub
towards the rear of the shaft.
Align slots in shaft with bores in Yoke hub and
Place yoke in slot of sliding clutch; threaded
end of piston shaft is towards the larger low
range synchronizer.
Place the entire assembly into auxiliary hous-
ing, exgaging splines or sliding clutch with
tai lshaft and inserting piston shaft through
cylinder bore.
install the two Iockscrews secure with safety
5. Install copper seal on threaded end of piston
wire.
shaft.
AUXILIARY REASSEMBLY
Summary of Contents for TRSM0515
