Eaton TRSM0515, Service Manual

Page: 76 / 88

Ill. CLUTCH HOUSING, AUXILIARY SECTION AND COMPANION
FLANGE INSTALLATION
A. To Install the Clutch Housing.
B. To Install the Auxiliary Section.
1. Install the drive gear bearing cover.
2. Install the clutch housing, attaching securely
with the six nuts and two bolts.
3. If so equipped, install the clutch release mech-
anism
NOTE: The two reverse gears, including the
washers, must be in perfect alignment with center
of case bores as the front of the auxiliary counter-
shafts must be inserted in these parts during aux-
iliary installation. A heavy grease or Iubriplate will
help hold washers in place. Also check rear of front
section to make sure all snap rings have been in-
stalled.
1. Install auxiliary section on front section, align-
ing auxiliary section on dowel pins and the ex-
tended portion of auxiliary countershafts with
reverse idler gears. It may make assembly eas-
ier if someone slowly rotates input shaft during
installation.
FRONT SECTION REASSEMBLY