G. To Disassemble the Countershaft
Assemblies.
NOTE: Both countershafts are disassembled
in the same manner as construction is iden-
tical.
1. Remove snap ring from front of countershaft.
2. Press the drive gear from shaft.
3. Press the 4th speed gear from shaft.
4. Using the rear face of the PTO gear as a base
in press, press the 3rd speed gear, and the
PTO-2nd speed gear cluster from shaft.
5. If necessary, remove woodruff key, long key
and roll pin from shaft.
H. To Remove the Right Reverse
Idler Gear.
The right reverse idler gear assembly is identical to
the left and is disassembled in the same manner.
FRONT SECTION DISASSEMBLY
Summary of Contents for TRSM0515
