4. Tilt housing and remove the three tension balls
5.
6.
installed under springs.
Place the housing in a vise with the plunger side
up; front of housing will be to the right.
Starting with the upper bar, move all bars to the
right and out front of housing as detailed in the
f o l l o w i n g i n s t r u c t i o n s . C u t l o c k w i r e a n d
remove Iockscrews from each bar just prior to
its removal.
7. Move top shifting bar to the right and out of
8.
housing, removing shifting yoke-from bar.
Move center bar to the right and out of hous-
ing, removing shifting yoke from bar. As
neutral notch in bar clears the front web,
remove the interlock pin from bore in neutral
notch.
NOTE: During disassembly, lay all parts on a
clean bench in the order of removal to facilitate
reassembly. Bars not being removed must be
kept in the neutral position or interlock parts
will lock bars.
DISASSEMBLY
Summary of Contents for TRSM0515
