Eaton Network-MS User Manual Download

Page: 9 / 143

www.eaton.com

Network
Management Card
(Network-MS)

User Manual

Network Management Card

– User Manual

34003991XT_EN/JC

Page

9/143

1.1.4.1 How to connect UPS / agent / network:

Insert the optional NMC communication card in the UPS and connect the UPS to the computer network.

Start the UPS, then the computers.

1.1.4.2 Setting up the protection:

Set up the Network Management Card (see user manual).

Install and configure the protection application on all machines that are to be protected by the UPS:

•

Intelligent Power Protector for EATON Pulsar series UPS: The software components for each platform

and the user manuals are on the Software Suite CD or available at

http://powerquality.eaton.com

Summary of Contents for Network-MS
















































































































































Search results

Summary of Contents for Network-MS

Reviews:

Related manuals for Network-MS

Brands by name

Popular brands

Eaton Network-MS, User Manual

Search results

Summary of Contents for Network-MS

Reviews:

Related manuals for Network-MS

Brands by name

Popular brands